Guangzhou, June 10, 2022 -- On June 9, AGM unveiled its first new phones of the year: AGM G1S Pro and AGM G1S.
In the run-up to the launch, AGM touted the new device as a professional thermal imager. At the time of launch, AGM explained why, the current market thermal imager configuration is outdated and not intelligent, thermal imager intelligent iteration, will eventually become a thermal imaging outdoor phone.
Thermal imaging module beyond professional thermal imager
The AGM G1S Pro's infrared thermal imaging module was originally designed to "revolutionize" the thermal imaging industry.
In professional thermal imager, there are four important parameters that affect the performance of thermal imager: thermal resolution, thermal refresh rate, temperature range, detection distance.
Thermal resolution: AGM G1S Pro has a thermal resolution of 256X192, which is already higher than most civilian thermal imagers, most of which are still at the 90x60 resolution stage. Thermal imagers beyond 256x192 resolution are expensive, and 256X192 resolution is already the standard for mid - to high-end thermal imagers.
Thermal refresh rate: Thermal refresh rate determines the smoothness of thermal imaging use. At present, the mainstream hot refresh rates in the market are 9Hz and 25Hz respectively, and the hot refresh rate of AGM G1S Pro is 25Hz. Images at 25Hz are much smoother than those at 9Hz, which is what the human eye is used to. In contrast, the TiS55, a professional thermal imager, also has a thermal resolution of 256X192 and a thermal refresh rate of only 9Hz. But the TiS55 is not cheap at 27,800 yuan.
Temperature range and detection distance: The temperature range of AGM G1S Pro is -20 degrees ~550 degrees, while the detection distance is 40 meters, and the accuracy of temperature measurement is 5 meters. Of course, the size of the object has a big effect on the thermal imaging. After measurement, if the object is large enough, it can be detected from 100 meters away.
Powerful intelligent thermal imaging software: IR Camera
In addition to the hardware of the thermal imaging module, the software paired with the thermal imaging module is no less impressive.
The thermal imaging software, named "IR Camera", has four special functions, namely regional temperature measurement, classification color palette, AR mode and secondary analysis.
Regional temperature measurement: as the name suggests, you can select a region of the thermal imaging screen to view the temperature of the object in this region.
Classification color palette: IR Camera built-in 9 different color palette, each color palette has a different role, take rainbow color palette as an example, can effectively stratify low temperature, high temperature, ambient temperature. White hot swatches can highlight hot objects.
AR mode: AR mode is the superposition of the real picture and the thermal imaging picture. It can not only see the hot object directly from the screen, but also let others know the temperature more directly when sharing the recorded video.
Secondary analysis: After a thermal image is taken, the intact temperature information can be seen through analysis. You can also frame any location in the thermal image to obtain temperature information in the area, and you can also form a report to share with friends or colleagues.
The hardware configuration of AGM G1S Pro has exceeded that of most traditional portable thermal imagers, and it can be regarded as an independent thermal imager. However, in terms of intelligence, it has incomparable advantages of traditional portable thermal imagers.
A higher level of three defense certification
The G1S Pro, released this time, uses an integrated fuselage, a stable structure, the perimeter of the C-shaped protection Angle design. For this reason, G1S Pro meets the IP68, IP69K, and 810H certification standards. It can soak in a water depth of 1.5 meters for 1 hour, and resist the water erosion of 100 bar at 80℃. It also has the ability to withstand a fall from 1.5 meters without damage. In contrast, conventional thermal imagers are only IP54 standard and cannot be compared with G1S Pro.
Weight reduction, 5500mAh long endurance
This time the G1S Pro battery into 5500mAh lithium battery, not only can run for a whole day, and the weight of the machine "drop" to 315g, compared to the mobile phone is still heavier, but has reached enough portable state, compared to the weight of up to 700+g traditional thermal imager, the advantage is obvious; Conventional thermal imagers generally have low batteries, which last only four hours.
Android +5G chip, intelligent thermal imager
In our opinion, G1S Pro is an intelligent thermal imager. Discard the traditional thermal imager using data cable/Bluetooth file transmission shortcomings. Once the thermal imager becomes a smartphone, efficient data transfer is not a problem, and cloud synchronization is easy to achieve.
128 gigabytes of RAM, whatever you want
128 gigabytes of memory isn't much, and it's true that, compared to a phone, 128 gigabytes of memory is pretty basic. But the basic memory of a typical thermal imager is only 2 or 4 gigabytes. Perhaps because of this, most traditional thermal imagers, though equipped with a camera, do not support video shooting. So the smartphone will be the ultimate portable thermal imager.
Outdoor images: 48 million main camera, infrared night vision, macro camera
AGM G1S Pro's outdoor video system includes a 48-megapixel ultra HD main camera, 20-megapixel infrared night vision, and a 2-megapixel macro camera.
Infrared night vision can not only shoot in full darkness, but also scan and check the pinhole camera.
Outdoor gadgets: lanyard hole, laser pointer
AGM G1S Pro is equipped with outdoor gadgets. One is the body lashing hole, which is very convenient for outdoor people to use.
The laser pointer is meant to be able to specify objects more clearly, and can be turned on with one button by setting the side keys. It is also advertised as fun for entertaining cats.
The AGM G1S Pro, valued at 28,888 yuan, was released for 4,499 yuan
AGM G1S Pro published a price of 28888 yuan at the beginning of the publicity, of course, this is to explain the high price of many thermal imager, and compared with thermal imager product upgrade, AGM G1S Pro selling price of 4499 yuan, in the eyes of thermal imager, this price has full cost performance.
Of course, AGM is releasing not only the AGM G1S Pro, but also the AGM G1S, which doesn't have a thermal imaging module and features night vision, but everything else is the same.
The AGM G1S Pro is priced at 4,499 yuan and AGM G1S at 3,099 yuan.
AGM G1S Pro and AGM G1S have been booked and will be available on all platforms at 20:00 on June 17.
